28
2025
-
03
Brief description of the working principle of a grinder
A horizontal rotary drum is used, with a PU inner lining that is acid and alkali resistant, wear-resistant, and protects workpieces from collisions.
Tumbling Machine
1. Uses a horizontal rotary drum with a PU inner lining, resistant to acids and alkalis, wear-resistant, and protects workpieces from collision.
2. The inner barrel has no coating, suitable for steel balls or steel products, as it can enhance cutting force and achieve greater results.
3. The barrel can rotate freely and has a suitable slope, making material feeding convenient.
4. As the simplest and most convenient model in the grinding machine series, it is suitable for processing and offers the most economical machine purchase cost.
5. This machine is suitable for forgings, castings, and sand castings that require strong cutting force.
6. Grinding work requires deburring, black spot removal, fine grinding, and chamfer polishing.
7. Advantages include low noise and easy operation.
Vibration Finishing Machine
1. Using the world's advanced principle of spiral rolling flow and three-dimensional vibration, the parts and grinding stones are mutually ground. This removes burrs, oxide skin, oil stains, etc., from the workpiece surface. Different grinding stones and grinding aids can be selected according to the material and shape of the workpiece. It can greatly improve the surface smoothness and brightness of the workpiece;
2. Suitable for polishing and grinding large batches of small and medium-sized parts, improving efficiency by 6-10 times.
3. The processing process does not damage the original size and shape of the parts.
4. It can achieve automated, unmanned operation, easy operation, and allows for inspection of the parts during processing.
Centrifugal Finishing Machine
1. Using a planetary transmission method and the principle of centrifugal motion, the polishing and grinding efficiency is high, increasing efficiency by 10-20 times. (The grinding barrel simultaneously rotates and revolves, greatly improving the friction efficiency between the grinding stone and the workpiece)
2. Suitable for polishing and grinding batches of small and medium-sized workpieces, especially those with complex cavities and those that have undergone heat treatment. (Can quickly remove burrs and oxide skin from the workpiece surface. Can also improve the brightness of the workpiece surface)
3. Equipped with a digital timer, momentary switch, and limit switch for safer and more convenient operation;
Eddy Current Finishing Machine
1. Using a unique eddy current flow principle, the workpiece and grinding stone can achieve fast and sufficient friction, with superior smoothing efficiency, increasing efficiency by 15-30 times.
2. The turntable motor is a speed-adjustable motor, and the turntable speed can be selected as needed; it is equipped with a digital timer, making it easy to operate and allowing for inspection of the workpiece processing at any time.
3. The fixed groove and turntable are lined with polyurethane rubber, which has high strength, good wear resistance, and a long service life.
4. Suitable for smaller workpieces.
5. This machine has a strong grinding ability to remove burrs, chamfers, black films, and polish.
Polishing,Motor
Previous article
Next article
Previous article
Next article
Latest developments
2025-03-28
The Use and Maintenance of Cylinder Liner Bearing Boring Machines
Cylinder block bearing boring machines are used for automobile engine repair, mainly for boring the main bearing and camshaft bearings of engine cylinder blocks.
2025-03-28
Inspection and repair methods for the planarity of the cylinder head working surface
The inspection and repair methods for the flatness of the cylinder head working surface are basically the same as those for the flatness of the cylinder block, except for different repair specifications.
2025-03-28
Repair of the cylinder body main bearing bore
Common failure modes can be roughly divided into four categories: wear, deformation, corrosion, and hole cracking. Methods for repairing the size of the main bearing bore include traditional methods and two new processes: zinc-aluminum alloy electroplating and nickel wire gas tungsten arc welding. Key points to note during the repair process.
2025-03-28
Basic Overview and Classification of Boring Machines
Boring Machine Overview: A machine tool that primarily uses a boring bar to bore pre-machined holes in a workpiece. Typically, the boring bar rotates as the main motion, and the boring bar or workpiece moves as the feed motion.
2025-03-28
Introduction to Milling Machine and Grinding Machine Fundamentals
In a machining center, the process of machining using a milling machine and a grinding machine is called milling and grinding.
Thank you for visiting the official website of Shaanxi Useful Machinery Co., Ltd., if you have cooperation intentions or suggestions, please contact us through the following methods, we will reply as soon as possible, thank you!
Telephone：+86029-84198368
E-mail:info@hy-mc.com
Address: Mingdu Industrial Park, Chang'an District, Xi'an